PRODUCTS

Temperature Transmitter

NCS-TT106H-R1 HART Single Channel Din Rail Temperature Transmitter

NCS-TT105 Temperature Transmitter

NCS-TT106 Temperature Transmitter (Head mounted)

NCS-TT108 Temperature Transmitter (8-channel sensor input)

NCS-TT106H-R HART Double Channel Din Rail Temperature Transmitter

NCS-TT106H-R1 HART Single Channel Din Rail Temperature Transmitter

Introduction Parameters Download

NCS-TT106H-R1 HART single channel Din Rail temperature transmitter, using the fieldbus technology, is a

new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control.

NCS-TT106H-R1 HART single channel Din Rail temperature transmitter integrates abundant function

blocks and realizes not only general measurement function but also complicated control strategy.

NCS-TT106H-R1 HART single channel Din Rail temperature transmitter uses digital technology, so it can

connect with many types of thermocouple and thermo resistive sensors. It has wide range and simple

interface between field and control room, which reduces the expense of installation, operation and maintenance.

NCS-TT106H-R1 HART single channel Din Rail temperature transmitter supports HART, FF, and PA protocols.

It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc.

NCS-TT105 smart temperature transmitter,

using the fieldbus technology, is a new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control.

NCS-TT105 transmitter integrates abundant function blocks and realizes not only general measurement function but also complicated control strategy.

NCS-TT105 uses digital technology, so it can connect with many types of thermocouple and thermo resistive sensors. It has wide range and simple interface between field and control room, which reduces the expense of installation, operation and maintenance.

NCS-TT105 supports HART, FF, and PA protocols. It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc.

Size of NCS-TT105 Temperature transmitter

Figure: Size of NCS-TT105 temperature transmitter (unit: mm)

Product Description

NCS-TT106 temperature transmitter supports FF H1, PROFIBUS PA and HART protocols and multiple temperature sensors. With independent R&D communication controller, it has become a fieldbus temperature transmitter with high performance.

Features

●	Support multiple thermal resistance and thermocouples
●	Thermal resistance supports 2/3/4-wire connection mode
●	Thermocouple can use cold end compensation function
●	Better accuracy: PT100 ±0.3 ℃; K-type ±0.4 ℃
●	Universally programmable for various input signals
●	Available protocols: HART /FF H1 /PROFIBUS PA

NCS-TT106H HART

Input Signal	Pt100、Pt1000、CU50、CU100、0～500Ω、0～4000Ω B，E，J，N，K，R，S，T eight kinds of Thermocouple -100mV～100mV voltage signal0
Channel	Single
RTD Wiring	2-wire, 3-wire, 4-wire
Bus Power	HART: 11～35 VDC
Bus Signal	HART，current mode
Electric isolation	1000VAC
Working Temperature	-40℃～85℃
Humidity Range	5%～95%RH
Start Time	≤5s
Refresh Time	0.5s
EMC	GB/T 18268.1-2010
Protection	Terminal IP00, housing IP40
Voltage effect	±0.005%/V
Alarm signal	Alarm output can be set as 3.5…23 mA Upper/lower limit current 20.8mA / 3.8mA
Current accuracy	0.03%

RTD Parameter

RTD Parameter at Normal Temperature

Signal type	Suggested range	Accuracy（25℃）	Temperature drift（per ℃）
Resistance Signal	0~500Ω	±0.04Ω	±0.001Ω
Resistance Signal	0~4000Ω	±0.35Ω	±0.015Ω
PT100	-200 ~ 850℃	±0.15℃	±0.003℃
PT1000	-200 ~ 850℃	±0.15℃	±0.005℃
CU50	-50 ~ 150℃	±0.15℃	±0.005℃
CU100	-50~ 150℃	±0.10℃	±0.003℃

Thermocouple

Thermocouple Parameter at Normal Temperature

Signal type	Suggested range	Accuracy（25℃）	Temperature drift（per ℃）
mV	-100mV ~ +100mV	±0.025mV	±0.001 mV
B	500 ℃~ 1810℃	±0.77℃	±0.050℃
E	-200 ℃~ 1000℃	±0.20℃	±0.025℃
J	-190 ℃~ 1200℃	±0.35℃	±0.01℃
K	-200℃ ~ 1372℃	±0.40℃	±0.025℃
N	-190℃ ~ 1300℃	±0.50℃	±0.015℃
R	0℃ ~ 1768℃	±0.75℃	±0.023℃
S	0 ℃~ 1768℃	±0.70℃	±0.023℃
T	-200℃ ~ 400℃	±0.35℃	±0.015℃

NCS-TT106F Foundation Fieldbus

Bus interface	FF
Bus power	9～32VDC
Input Signal	Pt100、Pt1000、CU50、CU100、0～500Ω、0～4000Ω Resistance; B E J K N R S T Thermocouple、-100mV～100mV、Custom defined TC、Custom defined RTD
Channel	Single
RTD Wiring	2-wire, 3-wire, 4-wire
Refresh Time	0.5s
Working Temperature	-40～85℃
Storage temperature	-40～85℃
Humidity Range	5～95%RH
Electric isolation	1000VAC
Voltage effect	±0.005%/V
Protection	Terminal IP00, housing IP40
EMC	GB/T 18268.1-2010 GB/T 18268.25-2010

RTD Parameter

RTD Parameter at Normal Temperature（25℃）

Signal type	Suggested range	Accuracy（25℃）	Temperature drift（per ℃）
Resistance Signal	0~500Ω	±0.04Ω	±0.001Ω
Resistance Signal	0~ 4000Ω	±0.35Ω	±0.015Ω
PT100	-200~850℃	±0.15℃	±0.003℃
PT1000	-200~850℃	±0.15℃	±0.005℃
CU50	-50~150℃	±0.15℃	±0.005℃
CU100	-50~150℃	±0.10℃	±0.003℃

Thermocouple

Thermocouple Parameter at Normal Temperature（25℃）

Signal type	Suggested range	Accuracy（25℃）	Temperature drift（per ℃）
mV	-100mV~+100mV	±0.025mV	±0.001 mV
B	500℃~1810℃	±0.77℃	±0.050℃
E	-200℃~1000℃	±0.20℃	±0.025℃
J	-190℃~1200℃	±0.35℃	±0.01℃
K	-200℃~1372℃	±0.40℃	±0.025℃
N	-190℃~1300℃	±0.50℃	±0.015℃
R	0℃~1768℃	±0.75℃	±0.023℃
S	0℃~1768℃	±0.70℃	±0.023℃
T	-200℃~400℃	±0.35℃	±0.015℃

Product Description

NCS-TT108 smart temperature transmitter, using the fieldbus technology, is a new generation of smart fieldbus temperature transmitter and it is an indispensable field device for process control. NCS-TT108 transmitter integrates abundant function blocks and realizes not only general measurement function but also complicated control strategy.

NCS-TT108 smart temperature transmitter supports eight-channel temperature sensor input. It applied to a variety of thermal resistance and thermocouple sensors and has wide range. NCS-TT108 supports FF, and PA protocols. It can be widely used in the petroleum, chemicals, electricity, and metallurgical industries, etc.

Features

●	Support many types of thermal resistance and thermocouple sensors
●	Thermal resistance supports 2/3 wiring connection mode
●	Thermocouple can use cold end compensation function
●	Support FF, PA protocols

Specifications

Input Signal	Resistance: PT100, CU50, CU100, 0~500Ω, 0~4000Ω Thermocouple: B, E, J, N, K, R, S, T Voltage signal: -100mV～100mV
Channel	8-channel
RTD Wiring	2-wire, 3-wire
Bus Power	9~32 VDC Current consumption (static): ≤20mA
Isolation	Between input channel and bus: 500Vrms (707 VDC) Between temperature converter module: 500Vrms (707 VDC) The two temperature input channels in the module are not isolated.
Working Temperature	-40℃~85℃
Humidity Range	0%~100%RH
Start Time	≤5s
Refresh Time	0.2s
Protection	IP20; Outside box IP67
Vibration	Arbitrary axial 0~200Hz, error is±0.05%/g of largest range
EMC	Bus terminal: GB/T 18268-2000 Table A1 Sensor terminal: GB/T 18268-2000 Table 1

TT106H-R Din rail temperature transmitter with dual channel input. Channel 1 can connect up to 4 lines of RTD, channel 2 can connect up to 3 lines of RTD, and channel 1 and channel 2 can be connected to TC signal at the same time.

导轨式双通道参数.png